Getting Started; Powering Up - RainWise IP-100 User Manual

2)

Getting Started

The IP-100 is available for both the MK-III LR and MK-III (418/433 MHz) weather stations. LR
models have the radio receiver built into the IP-100. The 418/433 MHz versions require an
external radio receiver. An external receiver can be provided for the LR models, contact service
if needed.
2.1)

Powering Up

LR Weather Stations
1. Connect power using the power
supply provided.
2. Connect the IP-100 to your network
using the Ethernet cable provided
with the unit. You may use your own
cable with a maximum length of 100
feet. Do NOT disconnect for at least
10 minutes after first power up.
418/433 MHz Weather Stations
1. Connect the IP-100 to the network
using the Ethernet cable provided
with the unit. You may use your
own cable with a maximum length
of 100 feet.
2. Connect the separate black receiver
module to the IP-100 using the silver
"phone" cable provided.
3. Apply power to the IP-100 using the
power supply provided.
RainWise IP-100 Users Guide
2014 Revision
IP-100
Power Supply
Power Supply
IP-100
Phone Cable
External Receiver
Ethernet Cable
Ethernet Cable
5