Network; Admin - RainWise IP-100 User Manual

5.2)

Network

In the network tab of your internal webpage you can view the network settings of your IP-100.
You will also see the current firmware version your device has.
Transmission stats of your data can also be found here. RainwiseNet stats along with any other
portal you sign up for will display on this page. Should you need assistance from RainWise
Service, they may ask for some of these stats.
5.3)

Admin

To access the ADMIN tab, enter the following username and password.
Username: admin
Password: admin
To manually set your IP address: Uncheck the box "Use DHCP".
You may now manually change the settings. When you are done changing settings, be sure to
select Save Network Changes.
If you wish to go back to factory settings you may reset your IP-100. Refer to Section 5.1 for
details.
RainWise IP-100 Users Guide
2014 Revision
12