Navigating On The Internet - Datawind PocketSurfer User Manual

Navigating On The Internet

USING THE POCKETSURFER.
Before you start navigating on the Internet using your PocketSurfer, please make sure that of
the following steps have been accomplished:
a. The settings for PocketSurfer are correctly selected and/or configured.
b. Your phone, if:
Bluetooth enabled, is turned on and the option is set correctly, or
Using a cell phone adapter (Bluetooth Adapter), is turned on and correctly
plugged
c. You already registered with the DataWind server
After all the previous steps have been performed correctly, please take some time to go through
the keyboard description section and familiarize yourself with its proper use and special
functions. Remember that certain mouse and standard keyboard functions have been
modified/adapted to make this web-browsing experience as realistic and unaltered as possible.
And now, just continue with the following instructions:
1. Turn on your
2. Press the Mouse Navigation & Clicking key (located besides
the scroll key) to initiate the connection.
3. On the top left hand corner of the device there should be information regarding the
status of the connection that is taking place.
4. After only a few seconds you should be able to see on your screen the PocketSurfer
web page (or our registration page if you have not registered yet).
PocketSurfer and follow the appropriate instructions on screen.
- 14 -
Mouse Clicking key
PocketSurfer
Mouse Navigation