Connect To A Wi-Fi Network Via Wps; Disconnect From A Wireless Network; Wi-Fi Direct - HTC One M9 User Manual

Connect to a Wi-Fi Network via WPS

If you're using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect your phone easily.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the WI-FI tile to turn it on.
3. Tap b elow the WI-FI tile and check the list of detected Wi-Fi.
4. Tap > WPS Push, and then press the WPS button on your Wi-Fi router.
Note: To use the Wi-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.

Disconnect from a Wireless Network

Quickly disconnect from a wireless network your phone is connected to.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the WI-FI tile to turn it on.
3. Tap b elow the WI-FI tile and check the list of detected Wi-Fi
4. You can:
Tap the wireless network that the phone is connected to, and then tap DISCONNECT.
l
If you want to remove the settings for this network, touch and hold the network name, and
l
then tap Forget network.
To connect to another wireless network, see Prevent Notifications from Unsecured Wi-Fi Networks.

Wi-Fi Direct

Use Wi-Fi Direct to connect directly to other Wi-Fi Direct devices simply via Wi-Fi, without an access
point or via the Internet.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the WI-FI tile to turn it on.
3. Tap b elow the WI-FI tile and check the list of detected Wi-Fi networks.
4. Tap > Wi-Fi Direct.
5. The Wi-Fi Direct settings menu appears.
Wi-Fi Direct and Wi-Fi are unavailable at the same time.
l
6. Tap a device with which to connect. If connected via Wi-Fi, you will see a confirmation. Follow
the onscreen instructions.
7. Accept the connection on the other device.
Connectivity 221