Lenovo THINKCENTRE 6019 Hardware Maintenance Manual page 62

56
Hardware Maintenance Manual
Diagnostic Error Code
001-024-XXX
System Addressing test failure
001-025-XXX
System Checksum Value error
001-026-XXX
System FLASH data error
001-027-XXX
System Configuration/Setup error
001-032-XXX
System Device Controller failure
001-034-XXX
System Device Buffer Allocation failure
001-035-XXX
System Device Reset condition detected
001-036-XXX
System Register error
001-038-XXX
System Extension failure
001-039-XXX
System DMI data structure error
001-040-XXX
System IRQ failure
001-041-XXX
System DMA failure
001-195-XXX
System Test aborted by user
001-196-XXX
System test halt, error threshold exceeded
FRU/Action
System board
1. Flash the system. See "Updating
(flashing) BIOS from a CD-ROM or
diskette" on page 494
2. System board
1. Flash the system. See "Updating
(flashing) BIOS from a CD-ROM or
diskette" on page 494
2. System board
1. Run Setup
2. Flash the system. See "Updating
(flashing) BIOS from a CD-ROM or
diskette" on page 494
3. System board
System board
1. Reboot the system
2. Flash the system. See "Updating
(flashing) BIOS from a CD-ROM or
diskette" on page 494
3. Run memory test
4. System board
System board
System board
1. Adapter card
2. System board
1. Flash the system. See "Updating
(flashing) BIOS from a CD-ROM or
diskette" on page 494
2. System board
1. Power-off/on system and re-test
2. System board
1. Power-off/on system and re-test
2. System board
Information only
Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file