Replacing The Cmos Battery - Lenovo THINKCENTRE 6019 Hardware Maintenance Manual

Replacing the CMOS battery

This procedure describes how to remove and replace the CMOS battery.
If the CMOS battery fails, the date, time, and configuration information (including
passwords) are lost. An error message is displayed when you turn on the
computer.
CAUTION:
When replacing the lithium battery, use only Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer.
1. Open the computer cover. See "Opening the cover" on page 118.
2. Locate the battery. See the system board illustration for your machine type at
3. You might have to remove any PCI adapters that impede access to the battery.
4. Remove the old battery.
5. Install the new battery.
6. Go to "Completing the parts replacement" on page 148.
Important
Refer to "Safety notices (multi-lingual translations)" on page 7 for information
about replacing and disposing of the battery.
"System board connectors" on page 117.
Note: When the computer is turned on for the first time after battery
replacement, an error message might be displayed. This is normal after
replacing the battery.
Chapter 9. Replacing FRUs - Ultra SFF Desktop computers
121