Table of Contents
Advertisement
3.9.6 Adjustments and Calibrations
ADJU
By this function you can adjust and calibrate the positions of the different
wheels and other motors. This can be necessary after a service or repair
work.
For this function you have to entry the fixture code. This work should be
done only by authorized persons.
Use the Up/Down-keys to select the desired function and press Enter to
confirm or Mode to cancel and return to the menu. Use now the Up/Down-
keys to set the adjustment values and confirm once more with the Enter-
key or cancel with the Mode-key.
Function
3.9.7 Default Settings
DFSE
Press Enter to reset all fixture personalities (not the adjusted functions) to
the default values. On the display will appear
defaults are set.
Function
DMX Address
Pan reverse
Tilt reverse
Automatic lamp on
Lamp on via DMX
Display
3.9.8 Error Code
EFLG
(Function available for authorized persons only)
GLP
German Light Production
COLO
- 99 - + 99
GOBO
- 99 - + 99
SHTR
- 01 - + 01
ARES
To initiate a reset for adjustment of the Shutter. Unit must be
turned off and on afterwards.
clre
Adjustments in the internal circuit.
(DFSE)
(EFLG)
(ADJU)
Value
Remark
Color wheel
Gobo wheel
Shutter
Display
D001
RPAN
RTLT
LAAU
DLOF
DISP
(V1.11)
ok
to indicate that the
Default Settings
D001
ON
OFF
ON
OFF
ON
ON
D ON
OFF
OFF
REV
15
Advertisement
Table of Contents
