Lenovo 40Y8699 User Manual page 22

Write speeds for Configuration 2
Media
DVD-R
DVD-RW
DVD+R
DVD+RW
CD-R
CD-RW
This configuration is used when connecting two standard USB ports on the host to the standard USB port
and USB power
Refer to the figure below during installation.
Figure 1-2. Configuration 2: USB standard bus power configuration
1. Turn on your computer.
2. Plug the standard USB connectors 3 , 4 into the USB port of your computer.
3. Using the USB cable, insert the cable plugs 1 , 2 into the USB connectors of the drive.
Note: Be sure that you connect cable plug 2 into the USB connector of the drive last.
1-8
USB 2.0 Super Multi-Burner Drive User's Guide
USB Standard Bus Power
2x CLV
2x CLV
2.4x CLV
2.4x CLV
4x CLV
10x CLV
port on the drive.