Installation; Attaching The Stand - Samsung S27E591C User Manual

1
Preparations
1.3

Installation

1.3.1 Attaching the Stand

Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Warning: The product is curved. Placing pressure on the product when on a flat surface may damage
the product. When the product is on the ground facing up or down, do not put pressure on it.
Insert the stand neck into the
stand base in the direction
shown in the figure.
Place the protective Styrofoam
(cushion) included in the
package on the floor and place
the product facing down on the
Styrofoam, as shown in the
image.
If Styrofoam is unavailable, use
a thick sitting mat.
Check that the stand neck is
firmly connected.
Hold the main body of the
product with your hand as
shown by the figure.
Push the assembled stand into
the main body in the direction
of the arrow as shown in the
figure.
Tightly fasten the connecting
screw at the bottom of the
stand base.
- Caution
Do not hold the product upside
down only by the stand.
1 Preparations
23