Setting The Alarms - capello Glow Clock User Manual

setting the alarm(s)
With the unit in STANDBY mode, slide the ALARM 1 switch to the "SET" position. The default time of "12:00"
will begin to ash and the "ALARM 1" indicator will blink on the display.
To SET THE HOUR, repeatedly press the TUNE / HOUR UP button to program the desired hour setting,
making sure to correctly choose AM or PM.
To SET THE MINUTES, repeatedly press the TUNE / MIN DOWN button to program the desired minute setting.
To CHOOSE THE ALARM SOURCE, slide the ALARM 1 switch to either the BUZZ or RADIO position.
The "ALARM 1" indicator on the display will turn solid con rming the programmed alarm time is set.
To SET ALARM 2, use the ALARM 2 switch and follow the same steps above.
notes: The alarm volume is preset and can not be adjusted.
If an external audio device is connected to the AUX IN jack, the default alarm source is buzzer.
turning off the alarm(s)
To SILENCE THE ALARM, press the POWER button. The "ALARM 1" indicator will remain on the display
con rming the alarm is set for the next day.
To TOGGLE THE ALARM ON/OFF, slide the ALARM 1 button to the OFF position. The "ALARM1" indicator will
disappear from the display.