Subscribe to Our Youtube Channel
Related Manuals for capello Power Tray CA-55W
Summary of Contents for capello Power Tray CA-55W
- Page 1 Users Guide Power Tray Alarm Clock Wireless Phone Charger USB-C Charging Port Ambient Nightlight CA-55W...
- Page 2 finishes and shared them with others who were able to help bring them to life and make them available for everyone to enjoy. That’s why we started Capello over 10 years ago. Thank you for choosing one of my designs. I...
- Page 3 Enjoying Power Tray? If you’re enjoying your Power Tray consider supporting us and sharing a review to let other customers know that it may be a good option for them too. https://www.target.com/b/capello/-/N-562z2...
- Page 4 WIRELESS SET POWER TRAY DOWN ON CHARGING PAD DRESSER, NIGHTSTAND OR OTHER HARD SURFACE WHEN PRESSING THE TOP PRESS DOWN ON TOP TO TURN NIGHTLIGHT ON/OFF AND SNOOZE ALARM WIRELESS CHARGING BATTERY RED GREEN/RED ALARM 1 GREEN PM BLUE ALARM 2 GREEN AM AMBER...
- Page 5 BACKUP BATTERY COVER (2X AAA BATTERIES NOT INCLUDED) BATTERY ORIENTATION MINUTE DIMMER HOUR ALARM 2 TIME SET ALARM 1 USB-C PHONE POWER PLUG CHARGER...
-
Page 6: Installation
Installation Plug in the AC/DC power cord to an AC wall outlet and then plug the other side into the back of Power Tray. Your Power Tray will turn on and is now ready to use. Setting Time 1. On the back of the Power Tray, press the time set button , and the time will flash. -
Page 7: Backup Battery Operation
Backup Battery Operation With the backup batteries installed if there’s a power failure or the clock is unplugged: - the display will turn off - press down on the top of Power Tray to turn the display on for a few seconds to see the time - the alarms will still sound - the time and alarm settings will be saved... -
Page 8: Setting The Alarm
Setting the Alarm 1. Press and hold the alarm button until the display flashes then release the button. 2. Press HR and MIN to set the time (you can tap or hold down to change the time faster.) As you cycle through 1-12, the hours will change from AM to PM. - Page 9 When the Alarm Sounds To snooze, press down on the top of the Power Tray. Please make sure Power Tray is sitting flat on a nightstand, dresser, desk or other hard surface. The Snooze duration is set during the alarm setup. To stop the alarm and reset it to sound again tomorrow, press any button on Power Tray (besides the Snooze button).
- Page 10 Qi Wireless Charging 1. Place your wireless device on top of Power Tray. Charging will start will start automatically. 2. When your device is charging, the LED indicator to the left of the time display will light green. Note: Power Tray has a protective circuit that detects when a device that is not Qi compatible or any metal object is set on charging pad and will disable power to the charger as a safety precaution.
-
Page 11: Troubleshooting
Troubleshooting If Power Tray is not functioning properly, it may be caused by electro-static discharge or other interference. Unplug the DC jack and remove backup batteries, plug the DC jack to the clock. Reinstall the backup batteries after 10 seconds. Power Tray will reset to default settings and you will need to set the time and alarm again. - Page 12 Product Care 1. Place Power Tray away from areas with direct sunlight, excessive heat or moisture. 2. Protect your furniture when placing Power Tray on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture. 3.
- Page 14 ...
Need help?
Do you have a question about the Power Tray CA-55W and is the answer not in the manual?
Questions and answers
How about the alarm volume adjustment