Inside The Box; Power Source; Turning The Unit On - capello Glow Clock User Manual

inside the box

CR10 Glow Clock, AC power adapter and user guide.

power source

Insert the small end of the AC adaptor into the DC In Jack (located on the rear of
the unit). Connect the other end to a wall outlet providing 100-240V AC, 50/60 Hz.
The output of the provided AC/DC Adaptor is DC 5V 0.8A
notes: Disconnect both ends of the power cord when not in use.
Use only the supplied AC adaptor with the following specs:
AC In - 100-240V AC, 50/60Hz / DC Out - 5V 0.8A

turning the unit on

Press the POWER button to turn the unit on.
Press the POWER button again to turn the unit off.
AC outlet
AC adapter's plug