Ninja BL771 Owner's Manual page 17

USE
Fig. 1
USING THE 4-BLADE ASSEMBLY
1 Holding the 4-Blade assembly by the shaft,
place it onto the gear shaft inside the bowl.
Ensure that the attachment fits around the
gear shaft and that it is standing straight.
2 Add the ingredients and secure the bowl lid
onto the bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet
and press on the power button ( ).
4 Select the speed that best suits your needs.
Pulse ingredients for even chopping by
pressing down in short intervals.
NOTE: Please refer to "Speed Settings &
Uses" chart for suggested uses and speeds.
5 When you have reached your desired
consistency, stop the appliance by pressing
the power button ( ) and wait for the blade to
stop turning.
6 To remove the lid, pull the lid handle up to a
90° angle and lift the lid off. Turn the bowl
counter clockwise and then lift off the base.
(Fig. 2, Fig. 3)
USING THE DOUGH BLADE
IMPORTANT: Use only the "DOUGH" button
when using this attachment.
REMOVAL
Fig. 2
USE
Suction
Lever
Fig. 3
IMPORTANT: Use the suction lever when
using the dough blade on SPEED 1/DOUGH.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
(Fig. 4) Push the suction lever on the side of
the motor base down to secure the suction
feet to the surface. (Fig. 4a) If the suction feet
have not totally adhered to the surface, press
down lightly on the base to give the suction
feet a better grip.
2 Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place
it onto the gear shaft inside the bowl. Ensure
that the attachment fits around the gear shaft
and that it is standing straight.
4 Add the ingredients and secure the bowl lid
onto the bowl.
NOTE: For best results add wet ingredients
first and then add dry ingredients.
5 Plug the power cord into the electrical outlet
and press on the power button ( ).
6 Once finished making dough, remove the
bowl from the motor base. (Fig. 2, Fig. 3)
7 To release the motor base from the counter or
table top, pull the suction lever up to release
the suction feet. (Fig. 4b)
NOTE: The suction lever activates the suction
feet for added stability.
www.ninjakitchen.com
Activate
Suction
Fig. 4a
Release
Suction
Fig. 4b
Fig. 4
17