Advertisement
SET UP LOCAL VIEWING ON YOUR PC
STEP 2
ThIS STEP rElATES TO rEmOTE vIEwING OvEr ThE lAN (lOCAl ArEA NETwOrK)
by uSING A PC lOCATEd ON ThE SAmE NETwOrK AS ThAT Of ThE SySTEm.
*your system muST be connected to a router prior to powering it ON.
1
192.168.1.12
DIGIMERGE
2
3
www.digimerge.com
retrieve System Information:
To retrieve the System Information, press the INFO button
on the Remote Control (ensure batteries are inserted) (or)
Press the ENTER button on the front panel of the Monitor.
record the IP and mAC Addresses in the section below:
IP AddrESS :
.
.
.
mAC AddrESS :
:
:
:
:
(Required for DDNS registration)
If the IP Address is 127.0.0.1 it means that you are either not connected to your local
network or your system is not in DHCP detect mode.
Install Software (on your local computer):
Insert the DigiClient Software CD into
your local computer's CD ROM drive
and proceed with the installation.
digiClient Software (on your local computer):
Follow the installation screens to complete
DigiClient Software installation.
NOTE: The system will lease
networking information from
your Router. If you wish to
set your information manu-
ally, then remove the from
:
DHCP option. Please consult
your Hardware Manual for
further Menu options.
under 15 minutes
under 30 minutes
under 60 minutes
LOCAL VIEWING INSTALLATION GUIDE
Time
Hardware
Skills - Intermediate
Hand Tools
Hardware
Skill Level
Hi Speed
Router
Under 30 Minutes*
Computer &
easy
Router*
* Installation time may
vary based on application
* Minimum System Requirement:
Skill Level
Windows XP, Pentium IV, 256MB
Ram (512MB Recommended),
200MB Storage, High Speed
Internet, DSL or Cable Modem
easy
Intermediate
advanced
4
digiClient Software (on your local computer):
Close the CD Menu Screen. A DigiClient
icon and a DigiPlayer icon will appear on your
desktop.
5
run the digiClient Software (on your local computer):
Double-click the DigiClient software icon on your
desktop to run the program.
NOTE: when you run DigiClient on your PC for the first
time, you may see the windows Security Alert. Please click
unblock to run the application. (on windows vista™ select
"Allow").
Please refer to your Software Manual for instructions about
using Digi Backup Player and Storage Calculator.
6
Set-up (on your local computer):
Click the Setup icon from the DigiClient Soft-
ware Screen
SET-uP buTTON
D221600 SERIES Quick Start Guide_R1
over 60 minutes
Router
Plug & Play connectors,
Intermediate
advanced
On screen set up
Page 4
Advertisement
