Advertisement
MULTIFUNCTION SYSTEM / MODES
4
PICTurE frAmE mOdE:
PIP
(PICTurE-IN-PICTurE)
Picture Frame Mode is used to display JPG images located on a USB
Thumbstick (connected to a USB Port on the side of the monitor).
To view JPG Images using Picture Frame Mode:
1. Connect a USB Thumbstick containing JPG images to the Monitor,
using one of the USB ports located on the side. JPG images cannot
exceed 1600 x 1200 pixels.
NOTE: A USB THUMBSTICK IS NOT INClUDED wITH THE SySTEM.
2. Switch the Monitor to Picture Frame Mode using the Multi-function
Mode button on the front of the Monitor, or by pressing the Picture
Frame Button on the Remote Control.
3. Configure the Picture Frame Menu to display the images.
If you press the PIP button on your remote control you can view your
DVR in a Picture In Picture. This provides you with the ability to view
images from your cameras while looking at your pictures.
www.digimerge.com
(CONTINUED)
5
Pvm (PublIC vIEw mONITOrING):
You can connect a slave monitor (not included) to
the system using the "Spot Out" output.
You can configure which channels will be displayed
on the slave monitor.
This feature is used for situations in which you
want to have the system in a back room while still
displaying images to the public eye, for deterrence
or advertising purposes.
Slave Monitor (not included)
D221600 SERIES Quick Start Guide_R1
Page 10
Advertisement
