Makita 5007F Technical Information page 6

R
epair
( 2 ) Take off 3 pcs. of pan head screws M5 x 50, then motor housing can be separated from blade case as illustrated in
Fig. 7.
Armature can be separated from motor housing together with shaft lock as illustrated in Fig. 7 A.
Motor housing
Pan head screw M5 x 50
Armature
( 3 ) Take the following step for assembling new armature.
Fig. 7 A, Fig. 7, Fig. 6 A, Fig. 6, Fig. 5
< Note in assembling >
Pay attention to the assembling direction of shaft lock, when assembling armature together with it.
See Fig. 8.
( 4 ) Take off 3 pcs. of tapping screws, and disassemble handle cover. So, light unit can be replaced
as illustrated in Fig. 9.
Tapping screws 4 x 18
Fig. 7
This portion has to be
faced to the front grip side.
Fig. 8
Light unit
Fig. 9
Armature
Fig. 7 A
Handle cover
P 6 / 12
Shaft lock
Front grip