Janome Memory Craft 6500 Professional Instruction Book page 75

Janome Memory Craft 6500 Instruction Manual
Warning Sign
The LCD screen shows an
abnomal display.
The Buzzer Sounds when:
Audible Signal
pip Normal operation
pip-pip-pip Invalid operation or malfunction
www.aaasewing.com
Cause
The elongation button is pressed when a
pattern that cannot be elongated has been
selected.
The power is turned on again after auto
thread cutting has been interrupted.
The presser foot is raised before auto
thread cutting is completed.
The machine is started when it halts due to
the overload.
The feed dog is dropped while sewing.
The bobbin winder spindle is locked while
winding a bobbin.
The machine is out of order due to a
problem in the item indicated.
(Example: "BM init error" means error in
initialization of stepping motor.)
Turn the power off and turn it on again.
73
Janome Sewing Machine
Try this
Elongation is applicable only
to satin stitches.
Press the Thread cutter button
to finish auto thread cutting.
Wait for at least 15 seconds to
restart. Remove tangled threads
around hook race and auto thread
cutting device.
Do not drop or raise the feed dog
while the machine is running.
Turn off the power and remove
tangled threads.
Contact the service center or the
store from whom the machine was
purchased.
MC6500P Owners Manual/ User Guide