Advertisement
4 Basic operation
1. Binding
（1）To insert the battery into the quadcopter battery container and connect them.
The Red indicator light and the Green indicator light will blink rapidly alternately,
please do not move and shake the quadcopter at this moment; to close the
battery cover when the Red indicator light and the Green indicator light blink
slowly alternately.
（2）To turn on the transmitter, the binding with the quadcopter will succeed after the
switching-on sound of the transmitter stops.
(NOTE: 1.To put the throttle stick to the lowest position before the binding.
2.SWA,SWB switches need to be in the "0" position.)
2. To receive the GPS signals
（1）For the first time outdoor, it takes longer to get the GPS signals, please wait
about 2 minutes until the LED light becomes steady.
（2）Please do not use the GPS Modes (Stable Mode and Return Home Mode)
indoor in order to avoid accidents.
3. Motor Unlock & Motor Lock
（1）Motor Unlock: Once binding, to put down the throttle stick to the bottom right
position. When the Red light become steady, the motors are unlocked.
（2）Motor Lock: Once binding, to put down the throttle stick to the bottom left
position. When the Red light blinks, the motors are locked.
4.Calibration:
If the quadcopter flies unsteadily, it needs to be recalibrated, the calibration
methods are as follows:
（1）To move the throttle stick to bottom left, the Red light and Green light blinks
alternately, then it is locked.
（2）To move the throttle stick to bottom right until the rear red and yellow lights
blink alternately, then to take off the quadcopter and make it hover in the air for
more than 20 seconds, and to land and lock it again. The quadcopter can fly
steadily after it is re-unlocked.
Motor Unlock(left hand)
0
0
+
Motor Lock(left hand)
0
+
+
Motor Unlock(right hand)
0
0
+
+
4 of 7
Motor Lock(right hand)
0
0
+
+
0
+
Advertisement
