Product Specifications; Intended Use; For Your Safety - Bosch GHG 660 LCD PROFESSIONAL Operating Instructions Manual

Product Specifications

Hot Air Blower
Order number
Voltage
Rated input power max.
Air flow approx.
Temperature at nozzle outlet approx.
Temperature measuring accuracy
at the nozzle outlet
on the display
Display operating temperature*
Weight without mains cable approx.
Protection class
* Outside of the operating temperature, the display can become black.
Please observe the order number of your unit. The trade names of the individual units may vary.
Noise Information
Measured values determined according to EN 50 144.
Typically the A-weighted sound pressure level of the
product is less than 70 dB(A).
Product Elements
1 Nozzle
2 Heat protection
3 On-off switch/selector switch
4 Cover with dust filter
5 Program selection button "P"
6 Display
7 Button for setting the air flow
8 Button for setting the temperature
9 Store button
10 Wide nozzle*
11 Glass protection nozzle*
12 Reflector nozzle*
13 Welding rod*
14 Welding shoe*
15 Reduction nozzle*
16 Heat-shrinkable tubing*
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
1 609 929 F39 • (03.10) T
GHG 660 LCD
PROFESSIONAL
0 601 944 7..
[V] 220–240
[W] 2300
[l/min] 250 ... 500
[°C] 50 ... 660
±5 %
±5 %
[°C] –20 ... +70
[kg] 1.0
/ II

Intended Use

The unit is intended for the forming and welding of
plastic, removal of paint and the warming of heat-
shrinkable tubing.
It is also suitable for soldering and tinning, loosening of
adhesive joints and the defrosting of water lines.
The unit must not be damp and must also not be
s
operated in damp surroundings.
Before each use of the unit, check the cable and
s
plug. If damage is detected, do not use the unit.
Have repairs performed only by a qualified techni-
cian. Never open the unit yourself.
English–1
GHG 660 LCD
PROFESSIONAL
0 601 944 7..
110–120
1400
250 ... 500
50 ... 600
±5 %
±5 %
–20 ... +70
1.0
/ II

For Your Safety

Working safely with this unit is pos-
sible only when the operating and
safety information are read com-
pletely and the instructions con-
tained therein are strictly followed.
The workplace should be well ventilat-
ed. Gases and vapours that occur are
frequently detrimental to health.