Product Description And Specifications - Bosch Professional GFF 22 A Original Instructions Manual

OBJ_BUCH-268-004.book Page 15 Wednesday, June 11, 2014 1:11 PM
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting grooves for biscuit dowel
joints in chipboard, hard- and softwood, plywood, fibreboard
or artificial marble (e.g. Corian®).
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Handle (insulated gripping surface)
2 On/Off switch
3 Clamping lever of the angle stop
4 Height scale
5 Angle scale
6 Centre mark of cut, horizontal
7 Slip safety
8 Knob of the adjustable height stop
9 Adjustable height stop
10 Marks of cutting disc width
11 Centre mark of cut, vertical
12 Clamping lever of adjustable height stop
13 Direction-of-rotation arrow on housing
14 Spindle lock button
15 Auxiliary handle (insulated gripping surface)
16 Attachment plate
17 Angle stop
18 Cutting depth adjustment knob
19 Lock nut for cutting depth adjustment
20 Knurled screw for cutting depth adjustment
21 Vacuum connection
22 Dust bag
23 Two-pin spanner
24 Clamping nut
25 Cutting disc
26 Direction-of-rotation arrow on the cutting disc
27 Centring collar on mounting flange
28 Mounting flange
29 Cutter spindle
Bosch Power Tools
30 Spindle direction-of-rotation arrow
31 Base plate lock washer
32 Base plate clamping screw
33 Base plate
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Biscuit Jointer
Article number
Rated power input
Output power
No-load speed
Cutting depth, max.
Spindle thread diameter
Diameter of cutting disc mount-
ing bore
Cutting disc diameter, max.
Cutting disc thickness, max.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-19.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a <2.5 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
English | 15
GFF 22 A
0 601 620 0..
W 670
W 400
-1
min 9000
mm 22
M10 x 1.25
mm 22
mm 105
mm 4
kg 2.9
/II
3 609 929 C81 | (11.6.14)