Network Camera - Panasonic TC-P42G25 Operating Instructions Manual

Network Camera

You can operate the Network camera from the TV remote and also check the images from the Network
camera on your TV.
Basic operation for Network camera
Preparations
Internet connections (p. 27)
Example of Network connection (p. 27)
Network settings (p. 42-45)
Before connecting the Network camera to the TV, please complete "IP setting" and run
"Connection test"(p. 42-45)
With all connected equipment turned on
Display "VIERA Link" menu
Select "Network camera"
Record now
Stop recording
VIERA Link control
Network camera
Speaker output
TV
Back to TV
View
4 split screen
Multi screen
(1/4)
Camera name
Camera 1
Model
BL-C210A
Select OK
RETURN
R 4 cam / 8 cam
9 split screen
Multi screen
(1/9)
Camera name
Camera 1
Model
BL-C210A
Select OK 1 - 9
RETURN
R 4 cam / 8 cam
Single screen
Single screen
■
Press to exit from
Camera name
Camera 1
a menu screen Model
BL-C210A
Pan
Tilt
RETURN
1 - 9 Preset position
0 Home position
■
Note
Press to return
A number of VIERA-compatible network cameras can be found at the following
to the previous
sites:
screen
http://www.panasonic.com/
http://panasonic.net/pcc/products/netwkcam/
For more details on setting and operation of the Network camera, please also read
the operating manuals for the Network camera.
28
If there is no registered camera displayed, please set it in
Network Camera settings. (p. 29)
There is also an option to start with sensor detection.
select
OK
Default camera setting (p. 29)
select
OK to Single screen
select
OK to Single screen
Navigation area
Pan
Tilt
RETURN
- Preset position
1 9
0 Home position
Network camera setting
Before using a Network camera, you need to register the camera as shown below. You can also
set default camera or disconnect/delete the registered cameras.
Follow direction
Select "Setup" and "Network cameras list"
Menu
Network settings
Connection test
Network connection Wireless (WiFi)
Wireless network
IP address/DNS settings
VIERA CAST setting
Network cameras list
Software update
Mac address 00-0b-97-7c-65-e9
Displays compatible network cameras that
have been connected and registered.
If there is no registered camera
Select "Yes" to start search
Please refer to camera's settings and enable its link
mode.
Start searching for network camera?
Yes No
Set Network camera setting
Network cameras list
Camera name Model Status
Camera 1 BL-C210A Connected
... ...
...
... ...
...
... ...
...
... ...
...
... ...
...
... ... ...
... ...
...
Select OK
RETURN
R Find cameras G Delete
B Disconnect Y Default camera
Network camera setting operation
"Please refer to camera's settings and enable its link mode. Start searching for network camera?"
"Yes" to start camera search.
Before you start to search for a camera, switch the camera to registration
mode. (For this operation, please refer to the operating manual for the
Network camera.)
■
Press to exit from
Search condition also depends on "Network settings" (p.42-45).
a menu screen
"Remove camera information?"
"Yes" to delete camera information.
"Disconnect to camera?"
■
"Yes" to delete camera connection.
Press to return
"Disconnected" will be displayed in "Status".
to the previous
"Set this camera as default camera?"
screen
"Yes" to set to the default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
"Connect to Camera?
"Yes": "Connect" will be displayed in "Status".
(Attach up to 8 Network cameras simultaneously).
- in "Network settings" (p.42)
select
-
next
select
next
select
Default
29