Panasonic TC-P42G25 Operating Instructions Manual page 23

Network Settings
Display the menu
Select "Setup"
Menu Setup
Channel surf mode
Language
Clock
ANT/Cable setup
Connected devices
Anti image retention
Network settings
Adjusts Surf mode, Language, Clock, Channels,
Inputs, and other settings.
Select "Network settings"
Menu Setup
Channel surf mode
Language
Clock
ANT/Cable setup
Connected devices
Anti image retention
Network settings
Configures settings and parameters of the
Press to exit from
network connection.
a menu screen
Select the item and adjust
Menu
Network settings
Press to return
Connection test
to the previous
Network connection
Wireless network
screen
IP address/DNS settings
VIERA CAST setting
Network cameras list
Software update
Mac address
Manual entry of the proxy address & port, if
required by the Internet service provider.
44
select
1/2
AII
IP setting/
set or next
DNS
settings
select
1/2
All
select
VIERA CAST
Wireless (WiFi)
- - - setting
00-0b-97-7c-65-e9
Network cameras list
Software
update
(continued)
[IP setting]
Select "IP setting mode" and set to
"Automatic"
(When IP automatic acquisition in DHCP can be used)
Menu select
IP address/DNS settings 1/2
IP setting mode
Automatic
IP address 192.168.0.5
Subnet mask 255.255.255.0
OK
Default gateway 192.168.0.254
The acquired address is displayed.
Each IP address is acquired automatically
[DNS settings]
Select "DNS setting mode" and set to "Automatic"
(When DNS automatic acquisition in DHCP can be used)
Menu select
IP address/DNS settings 1/2
IP setting mode Manual
Default gateway 192.168.0.254
IP setting mode Automatic
DNS setting mode Automatic OK
OK
Primary DNS 192.168.0.20
Secondary DNS 192.168.0.21
The acquired address is displayed.
Each IP address is acquired automatically
If you are using a broadband router, IP automatic acquisition in DHCP can be
used under normal circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for each device.
Set only if specified by the provider.
It is not required for normal household use.
Proxy address
This is the address of the relay server that is connected to the target
server instead of the browser and sends data to the browser.
Setting is only required if specified by the provider.
Select "Proxy address" and press OK
Menu VIERA CAST setting select
Proxy address
OK
Proxy port 0
Allows manual entry of proxy address for relay
server. (normally not required)
Enter address
(see "Entering characters" on p. 19)
Proxy address
pr I o
Select "OK"
Network camera setting (p. 29)
Select "Software update"
Menu select
Network settings
Connection test
Network connection Wireless (WiFi)
IP address/DNS settings OK
VIERA CAST setting
Network cameras list
Software update
Mac address 00-0b-97-7c-65-e9
Check if software update for the TV is
available
The Network settings become effective when you close the menu and run "Connection test".
Manual setting
Select "IP setting mode" and set to "Manual"
Select the item and press OK
Check the specifications of the broadband router
and enter each IP address
Subnet mask 10I 0 . 0 . OK 0 . 0
or change
channel
OK
Manual setting
Select "DNS setting mode" and set to "Manual"
Select the item and press OK
Enter each IP address as was specified by the
provider
Primary DNS 10I 0 . 0 . 0 . 0
or select
OK
Proxy port
This number is specified by the provider together with
the Proxy address.
Select "Proxy port" and press OK
Enter the Port number
Proxy port 0
or select
OK
If you perform the Proxy settings, it may make it
impossible to view VIERA CAST movie content.
Press OK to start the Software update screen
Follow directions on the screen
* Set "Clock" first. (p. 17)
45