Network Camera - Panasonic TC-P42G10 Operating Instructions Manual

Network Camera
You can operate the Network camera from TV's remote and also check the images from Network camera
on your TV
w_. j,._ [I.][O] IIN l_.J | [O] i
• (o]d,_m LV**:O] j
[.a,_, 11
i [N I_,
Preparations
® Internet connections (p. 29)
® Example of Network Camera connection (p. 31)
® Network setting (p. 44)
® Before connecting the Network camera to TV, please complete the "IP setting" and run
"Connection test"(p. 44)
® This feature is only available with Panasonic-made network cameras released after
summer 2009. (Preliminary model numbers: BL-C210A and BL-C230A) A number of
VlERA-compatible network cameras can be founded at the following sites:
http:llwww.panasonic.coml
http:llpanasonic.netlpcclproductslnetwkcaml
With all connected equipment turned on
Start up Network camera
® If there is no registered camera displayed, please set it in "Network Camera"
settings. (p. 31)
Select "Network Camera" in "VIERA Link"
® Using VlERA TOOLS
(p. 21)
VIERA Link control
® There is also an option to start with sensor detection.
View
Multi screen (Still image) Without Default camera (Default camera setting (p. 31))
4 split screen 9 split screen
Single screen With Default camera (Default camera setting (p.32))
• Press to exit from
a menu screen
EXIT
• Press to return
to the previous
screen
RETURN
@
® For more details on setting and operation of the Network camera, please also
read the operating manuals for the Network camera.
30