Seat Height - Active Care Medical Medalist 450 Owner's Manual

SEAT HEIGHT

The height of seat can be adjusted to three positions.
Remove the seat by pulling the bar on the bottom rear of
the seat's frame. Doing so will release the seat and allow
you to tip the seat forward and then lift up to remove it
from the wheelchair's base.
Using the included Allen wrench, loosen the bolts on the
rears of all four seat posts.
Remove the metal pins located on the sides of all four seat
posts.
Raise or lower the seat crossbars to the desired height.
Reinsert the metal pins so that they go completely through
the seat posts and the crossbar. Retighten the four Allen
bolts on the rears of the seat posts.
Warning! Only use the Medalist 450 with all four seat posts seat at the same height. Failure to
do so may result in the chair tipping over, causing serious injury.
12 Medalist 450 Owners Manual