Page 1
Windows XP Professional users. Additional Manual “OPERATING INSTRUCTIONS ” (cover) Add the instructions for “Panasonic Hand Writing” and “Display Rotation Tool” to the Reference Manual. Reference Manual • Touch Pad (Advanced) • PC Cards • Touchscreen • RAM Module • Panasonic Hand Writing •...
Supplementary Instructions First-time Operation “OPERATING INSTRUCTIONS ” (page 9-12) Replace as follows in step 1. Product Recovery CD-ROM Product Recovery CD-ROM Windows 2000 Windows XP Ignore step 7. Add the following after the operation of each operating system in step 8. Windows 2000 If the cursor cannot be directed correctly with the stylus, perform [Calibrate] in [Start] - [Programs] - [UPDD].
Dealing with Problems (Summary) “OPERATING INSTRUCTIONS ” (page 22-23) Replace as follows. Display No display after powering on When there is no display to an external display, • Check your cable connection to the external display. • Confirm your display is powered on. •...
(page 24-25) Replace the “Reinstalling” for the following. Reinstalling 1 Turn the computer off and connect the CD drive to the 6 <Only when using the CD-ROM drive Panasonic KXL- computer. RW21A> Select [Boot] menu, then select [CD Drive] and press 2 <Only when using the CD-ROM drive Panasonic KXL-...
Page 5
[OK]. 14 After the reinstallation procedure completes, press Enter . The computer will be shut down. 15 <Only when using the CD-ROM drive Panasonic KXL- RW10A> Remove the FIRSTAID FD. 16 Remove the CD drive, and then turn the computer on.
8 Press F10 . puter. At the confirmation message, select [Yes] and press Enter . 2 <Only when using the CD-ROM drive Panasonic KXL- The computer will reboot, and this screen should appear. RW10A> --------------------------------------------------------------------- Connect the floppy disk drive to the USB port of the com-...