Wiring Connection - Kenwood KDC-BT310U Instruction Manual

Wiring connection

Rear/subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
White
Light blue/yellow
White/Black
(Steering remote
control wire)
Gray
Gray/Black
Green
Blue/White
Green/Black
(Power control wire)
Purple
Purple/Black
Red Brown
(Ignition wire) (Mute control wire)
Yellow
(Battery wire)
Blue
(Antenna control wire)
Fuse (10 A)
If no connections are made, do not let the wire
come out from the tab.
To the steering wheel remote control
adapter.
To the power control terminal when
using the optional power amplifier,
or to the antenna control terminal in
the vehicle.
To the terminal that is grounded
when the telephone rings or during
conversation. (To connect the
Kenwood navigation system, refer
your navigations manual.)
(Not used)
Part list for installation
A Faceplate
B Trim plate
C Mounting sleeve
D Wiring harness
E Extraction key
ENGLISH | 19