Recommended Camera Settings - Sony NEX-FS700R NXCAM Handbook

RAW recording mode
■ Monitor
Precise focus is particularly important at 4K resolution. Where possible an external monitor should be used to check focus.
In 4K mode, video preview is at HD resolution. Focus precision can be checked on the built-in camera screen using focus assist
features such as [ Expanded Focus ] and [ Peaking Display ] .
Given the very high resolution, even minor variations in focus are noticeable at 4K. For this reason, it is best not to rely solely on
auto focus.
NEX-FS700R

Recommended camera settings

• Set the AUTO/MANU switch to [ MANUAL ].
• Set SDI output to [ RAW ]. (SDI signal output switches to RAW mode. This is automatically detected by the IFR5.)
• Choose from the following recording modes
Standard: [ 2K or 4K at 24p, 25p, 30p, 50p or 60p ]
Super slow motion: [ 4K at 120fps (four seconds) or 2K at 120/240fps (unlimited) ]
• Set the white balance to 3200K, 4300K or 5500K.
• Avoid [ S-Log2 ] and [ ITU800% ] picture profiles.
• ISO/GAIN [ should be as low as possible ] .
FS700R pre-loaded gamma curves and RAW recording dynamic range
Gamma curve
STD
Dynamic range 400%
HDMI
SDI ( RAW)
SDI
HXR-IFR5
/ AXS-R5
STILL CINE1 CINE2
400% 460% 460%
Component video output
* HDMI and component output are disabled when composite video
output is selected.
Filming (16:9)
The selected
the display.
Monitor 1
RAW file playback (16:9)
S-Log2 gamma is applied to the display,
irrespective of the selected picture profile.
Monitor 2
* Video is displayed in real time in 4K mode.
CINE3 CINE4 ITU709
460% 460% 400%
48
picture profile is applied to
Video output is not available in 2K mode.
709 ( 800% )
1300%
S-log2
1300%