Sony NEX-FS700R NXCAM Handbook page 19

How to set/operate
■ Register buttons
[ OTHERS ] [ ASSIGN BUTTON ]
1. MENU
TRANSITION ]
ON
2. When [ Focus Transition ] is [ on ] , buttons 4, 5 and 6 are
allocated to the [ Focus Transition ] function. Press button 4
to cycle through the four modes: STORE, CHECK, EXEC and
OFF.
■ Store focus points
3. Press button 4 to display the [ STORE ] screen, disengage Auto
Focus, shift the focus manually to point A, then press button 5.
4. Now do the same at point B and press button 6.
* The icon flashes during this procedure and operation is
disabled.
5.Pre s s but ton 4 again to switch to [ CHECK ] mode.
Check the focus at point A with button 5, and at point B with
button 6.
* The stored focus points A and B will be automatically
deleted in the event of any of the following:
• The camera is turned [ off ]
• The lens is removed
• Optical zoom is used
■ How to use: focus transition from A to B
6. From the [ CHECK ] screen, press button 5 to focus on point A.
Press button 4 again to switch to [ EXEC ] mode.
Start recording, then press button 6 to initiate a smooth
focus transition to point B.
* In [ EXEC ] mode, press button 5 again to transition back to
point A.
■ How to use: focus transition from current position to point
A (or point B)
From the [ CHECK ] screen, start recording with the focus set
to the current position, then press button 5 to initiate a smooth
focus transition to point A, or button 6 to transition to point B.
The following transition settings are available under MENU
[ ] :
The focus transition time can be set in the range 3.5 – 90 seconds.
Transition time
[ Start timer ] :
The focus transition can be delayed after pressing button 5 or 6 by 5, 10 or 20 seconds.
[ Rec Link ] :
Focus transition starts when recording commences (choice of Focus A and Focus B).
[ FOCUS
Button functions
[ CAMERA SET ] [ FOCUS TRANSITION ] :
17
Cycles through the four modes: STORE, CHECK,
EXEC and OFF
[ ]
In STORE mode: stores the focus point
[ ] [ ]
In CHECK or EXEC mode: initiates the focus
transition