Lenmar OmniSource BCR-467 Operating Instructions

Lenmar OmniSource BCR-467 Operating Instructions

Lenmar enterprises battery charger operating instructions

Advertisement

Quick Links

OPERATING INSTRUCTIONS

®
OmniSource
467 - MODEL BCR467

INTRODUCTION

Thank you for purchasing LENMAR's OmniSource 467, model BCR467. With it you can charge AA, AAA
and virtually all 4.8, 6, 7.2, 9.6 or 10 Volt camcorder batteries. This charger is compatible with Nickel
Cadmium, Lead Acid, Lithium-Ion, Nickel-Metal Hydride, and NoMEM® batteries. The BCR467 will operate
as an AC/DC Battery Charger and Reconditioner.
The OmniSource 467 will operate from a standard household AC outlet, or on the road from a 12 Volt
cigarette lighter socket. It is a complete, convenient system to refresh, condition, and charge almost any of
your rechargeable batteries.
Getting Ready...

CONNECTING THE POWER SUPPLY

To charge or discharge batteries, either the AC Adapter or the DC Automotive Adapter must be plugged into
the jack marked "DC INPUT" on the Base Module. Once you have done this, plug the power adapter into an
AC receptacle or cigarette lighter (depending on which adapter you are using).

If You Have...

Nickel Cadmium (Ni-Cd) Batteries
When you recharge a nickel-cadmium battery before it's fully drained, the battery "remembers" it is using
less than a full charge, resulting in a loss of capacity. Because of this, the BCR467 has a Discharge /
Charge feature which will automatically discharge your Ni-Cd battery and then charge it fully. Doing this will
assure that you will get the maximum life out of your Ni-Cd batteries.
NoMEM, Lithium-Ion (Li-Ion), Nickel-Metal Hydride (Ni-MH), and Lead Acid (Pb) Batteries
These types of batteries do not have a problem with "Memory". Be sure to follow the recommended charging
and storage instructions for the battery type you are using.

Using Your OmniSource 467

CHARGE MODE (for all battery types)

Plug the appropriate adapter into the proper power source (either a household AC outlet or 12 Volt Car
cigarette lighter) and plug the other end into the charger base module connector marked DC 12-18V INPUT.
Insert the battery into the proper charging slot (see diagram for proper battery location).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniSource BCR-467 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lenmar OmniSource BCR-467

  • Page 1: Operating Instructions

    4.8, 6, 7.2, 9.6 or 10 Volt camcorder batteries. This charger is compatible with Nickel Cadmium, Lead Acid, Lithium-Ion, Nickel-Metal Hydride, and NoMEM® batteries. The BCR467 will operate as an AC/DC Battery Charger and Reconditioner. The OmniSource 467 will operate from a standard household AC outlet, or on the road from a 12 Volt cigarette lighter socket.
  • Page 2: Specifications

    1. DC Power Input Jack - AC 4. JVC/Panasonic Adaptor or Car Cigarette /Hitachi/RCA 9.6 / 10V Batt Lighter Adaptor 2. Sony 7.2 Volt Li-Ion 5. AA / AAA Battery (x4) Battery 3. Charge Indicator 6. Canon 6VBattery The charger unit will beep once to verify the battery is making proper contact and will begin to charge the battery.
  • Page 3 Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to: LENMAR ENTERPRISES INC. USA , 4035 Via Pescador, Camarillo, CA 93012 When sending in product for service, your package should include evidence of date and place of purchase.

Table of Contents