Lenmar BCR261 Owner's Manual
  1. Manuals
  2. Brands
  3. Lenmar Manuals
  4. Battery Charger
  5. BCR261
  6. Owner's manual

Lenmar BCR261 Owner's Manual

Battery charger, reconditioner, tester, and power supply
Hide thumbs
1
2
3

Advertisement

Table of Contents

OPERATING INSTRUCTIONS

®
O
M
N
I
S
O
U
R
C
E
J
R
-
M
O
D
E
O
M
N
I
S
O
U
R
C
E
J
R
-
M
O
D
E

INTRODUCTION

Thank you for purchasing LENMAR's OmniSource JR Model BCR261. With it you can charge virtually all 6 Volt
Nickel Cadmium and NoMEM® batteries used with VHS-C, 8mm, and Hi-8 Camcorders. The BCR261 will operate
as an AC/DC Battery Charger, Reconditioner, Tester, and Camcorder Power Supply.
The BCR261 will operate from a standard household AC outlet, or on the road from a 12 Volt cigarette lighter
socket. Also, use the BCR261 to run your camcorder from either an AC or DC power source.
The BCR261 is a complete, convenient system to test, refresh, condition, and charge your 6 Volt camcorder
batteries.
Getting Ready...

CONNECTING THE POWER SUPPLY

To charge batteries, either the AC Adapter or the DC Car Adapter must be plugged into the jack marked "DC IN"
on the Base Module. Once you have done this, plug the power adapter into an AC receptacle or cigarette lighter
(depending on which adapter you are using).
SELECTING THE PROPER
CHARGING MODE FOR YOUR BATTERY
Ni-Cad (or Nickel Cadmium) Batteries
When you recharge a nickel-cadmium battery before it's fully drained, the battery "remembers" it is using less than
a full charge, resulting in a loss of capacity. Because of this, the BCR261 has a Discharge / Charge feature which
will automatically discharge your Ni-Cad battery and then charge it fully. Doing this will assure that you will get the
maximum life out of your Ni-Cad batteries.
You may also choose to fully discharge your Ni-Cad batteries before storing them for any reasonable period of
time. Use the Discharge for Storage instructions to properly prepare your Ni-Cad batteries before you store them.
OmniSource
BATTERY CHARGER, RECONDITIONER,
TESTER, AND POWER SUPPLY
Model BCR261
OWNER'S MANUAL
Please read before using!
L
B
C
R
2
6
1
L
B
C
R
2
6
1
JR
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BCR261 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lenmar BCR261

Summary of Contents for Lenmar BCR261

  • Page 1: Operating Instructions

    When you recharge a nickel-cadmium battery before it's fully drained, the battery "remembers" it is using less than a full charge, resulting in a loss of capacity. Because of this, the BCR261 has a Discharge / Charge feature which will automatically discharge your Ni-Cad battery and then charge it fully. Doing this will assure that you will get the maximum life out of your Ni-Cad batteries.

  • Page 2: Specifications

    GREEN light goes out to prevent the battery from recharging automatically. Using Your BCR261 As An Ac Power Source For Your Camcorder Connect the adapter plate provided to your camcorder in place of the battery. Plug either the AC Transformer or the DC adapter into the "DC IN"...
  • Page 3 Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to: LENMAR ENTERPRISES INC. USA , 4035 Via Pescador Camarillo, CA 93012 When sending in product for service, your package should include evidence of date and place of purchase.

This manual is also suitable for:

Omnisource jr bcr261

Table of Contents