Dialighting IS90-MH User Manual page 5

8.DMX 8.DMX Channels Channels
8.DMX Channels 8.DMX Channels
Chanel Chanel Chanel Chanel Function Function Function Function Values Values Values Values
1 Pan 0-255
2 Pan Fine 0-255
3 Tilt 0-255
4 Tilt Fine 0-255
0-015
016-031
032-047
048-063
064-079
5 Color 080-095
096-111
112-127
128-189
190-193
194-255
0-009
010-019
020-029
030-039
040-049
050-059
060-069
6 Gobo
070-079
080-099
100-119
120-139
140-159
160-179
180-199
Description Description Description Description
PAN Movement
Fine control of Pan movement
Tilt Movement
Fine control of Tilt movement
Open/White
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Forwards rainbow effect from fast to slow
Color rotation stop
Backwards rainbow effect from slow to fast
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 1 shake slow to fast
Gobo 2 shake slow to fast
Gobo 3 shake slow to fast
Gobo 4 shake slow to fast
Gobo 5 shake slow to fast
Gobo 6 shake slow to fast
from a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is kept at least
0.5m (1.5 ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or
injury in the event the clamp fails.
Mounting Mounting Mounting Mounting points points: : : : Overhead mounting requires extensive experience, including amongst others points points
calculating working load limits, a fine knowledge of the installation material being used, and periodic
safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt
the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main power cord to the
appropriate wall outlet.
Clamp Clamp Clamp Mounting Clamp Mounting Mounting Mounting: : : : The IS90-MH provides a unique mounting bracket assembly that integrates the bottom
of the base, the included "Omega Bracket," and the safety cable rigging point in one unit (see the
illustration below). When mounting this fixture to truss be sure to secure an appropriately rated clamp to
the included omega bracket using a M10 screw fitted through the center hole of the "omega bracket". As
an added safety measure be sure to attached at least one properly rated safety cable to the fixture using
on of the safety cable rigging point integrated in the base assembly