Connection To The Mains Supply - Russell Hobbs RHM2048SS User Manual

For UK use only – Plug fitting details (where applicable):
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
• The GREEN/YELLOW wire is the EARTH and must be connected to the terminal which is marked with the letter E or by the earth symbol or
coloured GREEN or GREEN/YELLOW.
• The BLUE wire is the NEUTRAL and must be connected to the terminal marked with the
letter N or coloured BLACK.
• The BROWN wire is the LIVE wire and must be connected to the terminal marked with the
letter L or coloured RED.
Always ensure that the plug cord grip is fastened correctly.
If you need to remove the plug, cut it from the mains lead and dispose of it. Never attempt to
re-use this removed plug or insert it into a socket outlet, as there is a very great risk of electric shock.
This plug has a 13A (BS1363) fused plug. Should the fuse need replacing, you must use an ASTA
approved fuse (conforming to BS1362) of the same rating
This appliance is designed to operate from a mains supply of AC230V ~ 50HZ.Check that the voltage marked on the product
corresponds with your supply voltage. Using a higher voltage than specified is dangerous and may result in a fire.
Important:
Do not immerse the cord or plug in liquid. Keep the cord away from heat sources or surfaces. Do not allow the cord to hang over the edge of
the work top surface. Do not use an extension cable to plug your oven in as this can be dangerous. Ensure that the oven is plugged directly
into a wall socket. Do not let the cord come into contact with the back of the appliance or housing cabinet, as this heats up during use and
damage the cord.
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at www.productcareuk.com

Connection to the mains supply

For Customer Services & Spare Parts please call 0345 209 7461
7