Downloaded From projector-manual.com Acer Manuals
Press "0~9" to input a password in the "Security" OSD.
For computer mode only. Use this button to select the next or
previous page. This function is only available when USB Ctrl
connector (mini type B) is connected to a computer via a USB
To change source to COMPOSITE VIDEO.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
To change source to S-Video.
For USB control and firmware upgrade.
To change source to HDMI/MHL. (no DVI function)
Press "LAN/WiFi" to display the image which is wire or
wirelessly transmitted from the PC to the projector via the
"Acer LAN webpage management" utility.
Aim the remote at the viewing screen.
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
Note: Functions vary depending on model definition.