Sharp Aquos Operation Manual page 87

>>
Using AQUOS LINK
<<
Controlling HDMI Equipment Using
AQUOS LINK (Continue)
AQUOS LINK Setup
Make the settings to use AQUOS LINK. Set the settings
with "Setup" > "Advanced" > "AQUOS LINK Setup".
AQUOS LINK Control
Select AQUOS LINK Control to disable the AQUOS LINK
function even when an AQUOS LINK-compatible HDMI
device is connected to the TV. This function prevents the
device from starting to operate unexpectedly.
Auto Power On
If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Selecting Recorder
When multiple AQUOS LINK-compatible devices are
connected, this function allows you to set the recorder.
Channel Select Key
This function can be set for each input terminal.
The remote control unit of the TV can be used to select the
channel, display program information, and perform other
operations of the connected AQUOS LINK-compatible
equipment.
ENG 6-2
Audio Return Channel
This function allows you to listen to the TV audio via audio
equipment without using an optical fiber cable, which
conventionally is required.
Requirements for using an ARC-compatible AV
amplifier:
ARC-compatible AV amplifier connected to the ARC-
compatible HDMI IN 1 terminal.
(Refer to the operation manual of the ARC-compatible
equipment for details.)
Use of an ARC-compatible cable.
Auto: You can listen to the TV audio with ARC-compatible
audio equipment.
Off: This function does not work.
NOTE
If the TV audio cannot be output from the AV amplifier
even after making the necessary settings, connect the
TV to the AV amplifier with an optical fiber cable and
select "Off".