Launching The Diagnostic Program; Exiting The Diagnostic Program; Diagnostic Operation - Casio SE-S400 Service Manual

5. DIAGNOSTIC PROGRAM

5-1. Launching The Diagnostic Program

(1) Set the paper.
(2) Perform initialization.
Plug the power cord to a power outlet with the Mode Switch OFF.
1
While pressing the keys below, turn the Mode Switch to [PGM].
2
One-printer model
Two-printer model
Initialization is complete when "INIT" appears on the Main Display.
3
INIT
0000000000
(3) Press 99990000s .
(4) The diagnostic program starts and the version information of the diagnostic program is
automatically printed.
NOTE: Once the program starts, the status is displayed.
Boot Ver : xxxx xxxxxx
A p l i Ve r : xxxx xxxxxx

5-2. Exiting the Diagnostic Program

(1) Turn the Mode Switch to [OFF].
(2) Perform initialization.
(3) Unplug the Power cord.
SE-S400/PCR-T500/PCR-T520/SE-C450/
SE-S3000/PCR-T2300/PCR-T2400/SE-C3500
[FEED]
[JOURNAL FEED]
← Version
← Diag Version
– 18 –