Engine Switch; Ac No-Fuse Breaker (N.f.b) - Hitachi E40 Safety Instructions And Instruction Manual

English

ENGINE SWITCH

The engine switch controls the ignition system.
① "ON"
Ignition circuit is switched on.
The engine can be started.
② "STOP"
STOP
Ignition circuit is switched off.
The engine will not run.
③ "START"
Starting circuit is switched on.
The starter motor starts.
CAUTION:
Take your hand off the switch immediately after the
engine starts.

AC NO-FUSE BREAKER (N.F.B)

The AC NO-FUSE BREAKER turns off automatically when the load exceeds the
generator rated output or leakage, and when leak exists in the output circuit.
①
"ON"
② ○ "OFF"
CAUTION:
Reduce the load to the specified generator rated output if
the AC (N.F.B) turns off. If it turns off again, consult your
HITACHI dealer.
TEST BUTTON
Press the test button to check that the N.F.B. turns off.
① "ON"
6
E40(3P), E50(3P), E57(3P)
ENGINE SW
STOP
Fig. 6
E57(S3P)
STOP
Fig. 7
NO FUSE BRAKER
Fig. 8
TEST
Fig. 9
Fig. 10