Preparation; Precautions For Installation And Use; Unsuitable Environments - Sony SRX-T615 Operating Instructions Manual

Preparation

Precautions for
Installation and Use

Unsuitable Environments

Do not install the projector in the following types of
environments. Doing so may result in malfunctions or
damage to the projector.
Poorly ventilated locations
The intake and exhaust vents prevent the projector's
interior from overheating. Avoid installation in locations
with poor ventilation, and make sure the intake and exhaust
vents are free from obstructions.
Locations that obstruct the intake and
exhaust vents
If objects are placed near the exhaust vents located on the
top of the projector and on its sides, exhaust will flow into
the intake vents. This may cause the projector's interior to
overheat and the protection circuit to activate. Be sure to
leave sufficient space for the exhaust to escape when
installing the projector. Maintain a clearance of about 1 m
3
(39 / in.) between the projector and objects.
8
Locations subject to high temperature and
humidity
Locations subject to sudden temperature
changes
Sudden temperature changes in an enclosed space where
the projector is installed will result in condensation, which
may in turn result in malfunctions. Be careful when using
air conditioners.
Dusty locations

Precautions for Installation and Use

9