Setting The Meter And Deleting The Memory - GlucoRx TD-4230 Owner's Manual

Setting the Meter and Deleting the Memory

Your meter comes with the time, date, unit of measurement, memory
deletion and alarm function setting. If you need to set these
parameters, please follow below steps.
Start with the meter off. Then press
the set button located in the battery
compartment. The meter is now in the
setting mode.
STEP 1. Set the Year
After pressing the set button, the year,
a blinking number, will be shown on the
screen. Press and release the M button to
plus one year. You can also keep pushing
down the M button to proceed faster.
When the correct year is displayed on
the screen, press the set button and then
a flashing number, which stands for the
month, is shown.
STEP 2. Set the Month
Press and release the M button until you
see the correct month. To move faster,
keep pushing the M button down. When
the desired month is displayed, press the
set button and then the day will flash.
16