Chauvet COLORstrip Quick Reference Manual page 3

Hide thumbs Also See for COLORstrip:

Product

Description

Product Overview

AC Power

Power Linking

Fuse Replacement

The COLORstrip™ is a full-size, linear wash light for use in up-lighting

applications or for eye candy effects. Fully compatible with the Satellite™

battery-operated system, you can create additional effects by linking multiple

strips together to make runway chases.

Power Out

Power In

LED Display

Footswitch Controller Input

Sound Sensitivity Knob

This product has an auto-ranging power supply that can work with an input

voltage range of 100~240 VAC, 50/60 Hz.

You can link up to 15 COLORstrip™ units at 120 VAC and 28 units at 230

VAC.

Disconnect this product from power.

Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

Pry the safety cap out of the housing pulling out the installed fuse.

Remove the blown fuse from the safety cap and replace with a fuse of the

exact same type and rating.

Insert the fuse holder back in place and reconnect power.

Fuse Holder

Microphone

Page 3 of 8

COLORstrip™ QRG

DMX In/Out

Master/Slave

Output

Satellite™ D-Fi

Safety Loop

Output

Table of Contents