Door Reversal - GEA GTR03BL series Owner's Manual And Installation Instructions

Preparing to install the refrigerator.
Top Cover Support Top Cover Support
J-shaped hinge J-shaped hinge
Support Mounted Support Mounted
under FZ under FZ
Door on left side Door on left side
2 Plug Buttons 2 Plug Buttons
Adjustable Legs Adjustable Legs

Door Reversal

1. Remove the two screws from under the
screw caps located on the top cover.
2. Remove the two screws from the back of
the top cover and remove top cover.
3. Remove the top hinge by removing the
two screws, as shown.
4. Remove the freezer door by lifting off of
the middle hinge.
5. Remove the J-shaped hinge support on
the bottom of the freezer door.
6. Install new J-shaped hinge support on
the opposite side of the freezer door
bottom. The new J-shaped hinge
support and mounting screw are
located in a zip lock bag that is shipped
with the refrigerator.
7. Remove the two screws from the top
cover support. Install top cover support
on the opposite side of refrigerator.
8. Remove the middle hinge. Remove plug
buttons from the opposite side of
refrigerator. Re-install plug buttons in the
original hinge mounting holes.
Door Reversal (cont.)
9. Remove the fresh food door by lifting
Top Cover Top Cover
10. Remove both adjustable legs.
11. Remove the bottom hinge and re-install
Freezer Door Freezer Door
12. Re-install the adjustable legs. Insure
Middle Hinge Middle Hinge
J-shaped hinge J-shaped hinge
Support Mounted Support Mounted
13. Place the fresh food door on the bottom
under FZ under FZ
Door on right side Door on right side
14. Place the bottom peg of the middle
Fresh food Door Fresh food Door
15. Place the freezer door on the top peg of
16. Re-install the top cover with four screws.
17. Replace the screw caps.
off the bottom hinge.
on the opposite side of the refrigerator.
that the smaller leg is on the same side
as the bottom hinge.
hinge.
hinge in the fresh food door. Re-install
middle hinge. Make sure the fresh food
door is aligned with the refrigerator
cabinet before tightening screws.
the middle hinge. Place the top hinge
peg into the freezer door. Re-install top
hinge. Make sure the freezer door is
aligned with the refrigerator cabinet
before tightening screws.
11