Care And Cleaning; Cleaning The Outside; Cleaning The Inside; Replacing The Light Bulb - GEA GTR03BL series Owner's Manual And Installation Instructions

Care and cleaning

of the refrigerator.

Cleaning the Outside

Keep the outside clean. Wipe with a clean cloth lightly dampened
with kitchen appliance wax or mild liquid dish detergent. Dry and
polish with a clean, soft cloth.
Do not wipe the refrigerator with a soiled dish cloth or wet towel.
These may leave a residue that can erode the paint. Do not use
scouring pads, powdered cleaners, bleach or cleaners containing
bleach because these products can scratch and weaken the paint
finish.
Protect the paint finish. The finish on the outside of the refrigerator
is a high quality, baked-on paint finish. With proper care, it will
stay new-looking and rust-free for years. Apply a coat of kitchen/
appliance wax when the refrigerator is new, and then at least
twice a year.

Cleaning the Inside

To help prevent odors, leave an open box of baking soda in the
refrigerator.
Unplug the refrigerator before cleaning. If this is not practical,
wring excess moisture out of sponge or cloth when cleaning
around the control.
Use warm water and baking soda solution –about a tablespoon
(15 ml) of baking soda to a quart (1 liter) of water. This both
cleans and neutralizes odors. Rinse and wipe dry.
Other parts of the refrigerator–including door gaskets, fruit
and vegetable drawers, and all plastic parts–can be cleaned
the same way.
Do not wash any plastic refrigerator parts in the dishwasher.

Replacing the Light Bulb

Unplug the refrigerator before replacing a burned-out bulb. Setting
the controls to
4
5
The light bulb is located behind the temperature control housing and
6
is visible through the clear lens.
Using a Philips screwdriver, unscrew the lens and pull horizontally until
the lens is removed. Gently unscrew the light bulb and replace with a
bulb of 15 watts or less.
0
does not remove power to the light circuit.
GEAppliances.ca
7