Control 19 - Software Installation; Write Protection; Deactivating Write Protection; Activating Write Protection - Gira Control 19 Installation And Operating Instructions Manual

Control 19 – Software installation

Write protection

Symbol in the menu bar
On
Off

Deactivating write protection

 Right-click on the "Write protection" symbol in the menu bar or press and hold the write
protection with a single finger.
 Select Deactivate write protection.
 Press OK.
Automatic restart in 10 seconds. Windows shuts down and is restarted.
Wait until the "Write protection is being activated. The system will then be restarted."
message appears.
 Click on Cancel within 15 seconds; otherwise write protection will be reactivated.
Write protection is deactivated.

Activating write protection

 Right-click on the "Write protection" symbol in the menu bar or press and hold the write
protection with a single finger.
 Select Activate write protection.
 Press OK.
Automatic restart in 10 seconds. Windows shuts down and is restarted.
Write protection is activated. Symbol in the menu bar.

Switching the cursor on/off

The "Cursor off" program makes the mouse pointer invisible.
The "Cursor on" program makes the mouse pointer visible again.
To switch the mouse pointer invisible after each restart, the "Cursor off" program must be
copied into the Windows Autostart.
 Deactivate write protection.
 Copy "Cursor off" link into the Autostart folder.
 Activate write protection.
35