Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Gira Control 19
- Page 1 Installation and Operating Instructions Control 19 2088 00...
-
Page 3: Table Of Contents
Control 19 – Software installation ........ -
Page 5: Safety Instructions
Safety instructions Installation and mounting of electrical devices may only be carried out by qualified electricians. Failure to observe the instructions can result in damage to the device, fire or other dangers. Danger of electric shock. Isolate before working on the device. Take account of all circuit breakers supplying dangerous voltage to the device. - Page 6 Design frame 13 Loudspeaker Control 19 Client 14 Touch screen surface Connection terminal 15 Microphone Flush-mounted box 16 On/off button SD card holder 17 230 V AC connection Mount for design frame 18 Fuse Mounting holes 19 24 V DC connection...
-
Page 7: Function
The operating system is based on Microsoft® Windows® XP Professional in a save- optimised version. All components required for device functionality are pre-installed. Further drivers and programs, e.g. the Gira QuadClient software package and DCS Communicator, can be installed subsequently if required. -
Page 8: Operation
The operating system shuts down and switches off. Note In state of delivery, the device automatically logs in with the user name Control and the password Gira. Further users can be added and settings can be modified in the system at any time. -
Page 9: Resetting
Resetting When Control 19 is no longer operational, for example following a program crash, it can be reset and switched off. In this case all unsaved data is lost. The design frame (1) has been removed, the on/off button (16) is accessible. -
Page 10: File-Based Writing Filter
File-based writing filter The device has a solid state drive (SSD) as a mass storage device. In order to prevent unauthorised modifications to the configuration, the drive is protected with a file-based writing filter (FBWF). Writing operations to the protected area are redirected to a virtual drive in the RAM. -
Page 11: Information For Electricians
Information for electricians Mounting and electrical connection DANGER! Electric shock if live parts are touched. Electric shock may lead to death. Isolate all appropriate circuit breakers before working on the device. Cover up live parts in the vicinity! Connecting and installing the device Note Mount at eye level for optimal reading. -
Page 12: For 230 V Ac Installation
Connect the network cable to the terminal (21) of the Control 19. Mount the Control 19 in the flush-mounted box. Use the included screws for this. Insert the design frame into the intended mounts and carefully pull down. -
Page 13: Gira/Pro-Face Serverclient 15
Cover up live parts in the vicinity! The flush-mounted box for the ServerClient 15 has no earth connection and is therefore not suitable for connection of a Control 19 with 230 V. An earthing set is included for ret- rofitting this flush-mounted box. -
Page 14: Start-Up
Start-up Calibrating the touch screen Note The touch screen must be calibrated for the cursor to follow the motion of the finger exactly. Calibration is required in the following cases: − The device has been newly mounted. − Modifications have been made to the device. All installation work must be complete in order to perform calibration. -
Page 15: Control 19 - Software Installation
Control 19 – Software installation Write protection Symbol in the menu bar Deactivating write protection Right-click on the "Write protection" symbol in the menu bar or press and hold the write protection with a single finger. Select Deactivate write protection. -
Page 16: Installing Dcs Communicator
To install the DCS Communicator, the installation file of the DCS-IP-gateway must first be downloaded (see the DCS-IP-gateway operating instructions). Deactivate write protection. Copy the corresponding installation file to the Control 19 and run it locally there. Follow the directions of the installation software for the further installation. Note Run the Audio Assistant only when the design frame is mounted. -
Page 17: Restoring The Operating System
In this case, it may be necessary to replace the installed operating system using an image. A Gira Control 19 Client USB recovery stick and a USB keyboard are required to restore the operating system. A USB recovery stick for this purpose is included in the scope of supply of the Gira Control 19 Client (from index status I05). -
Page 18: Brief Overview Of The Work Steps Described Above In The Bios
Connect a USB keyboard to the outside USB port and insert the recovery stick into the inside USB port Start the Gira Control 19 Client by pressing the ON/OFF button and press the "Del" key on the USB keyboard several times during booting to access BIOS. -
Page 19: Technical Data
Technical data Power supply Rated voltage AC AC 100 to 230 V~ 50 / 60 Hz Rated voltage DC DC 24 V Micro-fuse T 2 A L 250 V Standby power approx. 3 W Power consumption (100% CPU) max. 39 W Power consumption (display switched off) approx. -
Page 20: Accessories
Please submit or send faulty devices postage paid together with an error description to your responsible salesperson (specialist trade/installation company/specialist electrical trade). They will forward the devices to the Gira Service Center. Gira Giersiepen GmbH & Co. KG Dahlienstrasse 12... - Page 21 Gira Giersiepen GmbH & Co. KG Elektro-Installations- Systeme Industriegebiet Mermbach Dahlienstraße 42477 Radevormwald Postfach 12 20 42461 Radevormwald Deutschland Tel +49(0)21 95 - 602-0 Fax +49(0)21 95 - 602-191 www.gira.de info@gira.de...