Information for electricians
Mounting and electrical connection
DANGER!
Electric shock if live parts are touched.
Electric shock may lead to death.
Isolate all appropriate circuit breakers before working on the device.
Cover up live parts in the vicinity!
Connecting and installing the device
Note
i
Mount at eye level for optimal reading.
Ensure sufficient cooling. Do not cover up ventilation slots.
Mount the flush-mounted box horizontally in the wall.
Note
i
Observe the mounting instructions for the flush-mounted box.
Feed the connection cable and network cable through the provided grommets.
DANGER!
Danger of electric shock if live parts are touched! Mains voltage and low voltage
are located in a joint housing. In case of a fault, other connected components may
also carry mains voltage.
Electric shock may lead to death.
Always secure the mains voltage wires with the included sheath.
Route cables so that low voltage wires are dependably protected against mains
voltage.
31