Setting Up The Piano; Turning On The Power; Adjusting The Volume; Using Headphones - Kawai CA17 Owner's Manual

Setting Up the Piano

1. Connecting the power adaptor
Connect the AC power adaptor to the DC IN terminal located
on the underside of the instrument, as indicated below.

3. Turning on the power

Press the POWER switch, located on the right hand side of the
instrument's front panel.
The LED indicator for the SOUND SELECT button will turn on
and the Concert Grand sound will be selected automatically.
 Using headphones
Use the jacks located beneath the keyboard on the left hand
side, to connect stereo headphones to the CA17 digital piano.
Up to two pairs of headphones can be connected and used
simultaneously. When a pair of headphones is connected,
sound will not be produced by the speakers.
2. Connecting the power adaptor to an outlet
Connect the AC power adaptor to an AC outlet.

4. Adjusting the volume

Move the MASTER VOLUME slider up and down to increase
and decrease the volume level of the instrument's speakers, or
headphones if connected.
Adjust the volume to a
comfortable listening level
– the middle is often a good
starting point.
 Adjusting the pedal support bolt
A pedal support bolt is attached at the base of the pedal board
to aid stability when the pedals are pushed. Turn the bolt anti-
clockwise until it makes contact with the floor and supports
the pedals firmly.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.
Increase
volume
Decrease
volume
11