Placing Originals; Platen Glass - Canon imageRUNNER ADVANCE 500i Quick Operation Manual

Placing Originals

There are two ways to place originals on the machine. You can either place them on the platen glass,
or use the feeder. When you want to copy/scan multiple documents at once, place the originals in the
feeder. When copying/scanning originals that cannot be placed in the feeder (books, a single page of a
stapled document, etc.), place the original directly on the platen glass.

Platen Glass

1
Feeder
1
Numeric Keys
Use these keys when entering numeric values, such as when entering fax
numbers or the number of copies.
Start Key
Press this key to start copying or scanning.
Stop Key
Press this key to stop a copy/scan job currently in
progress.
2
With the side of the original you want to scan face
down, align the top edge of your original with the
back edge of the platen glass (by the arrow in the
top left corner).
2
3
Place the originals in the feeder
with the side that you want to
scan face up.
Reset Key
Press this key to restore the standard settings of
the machine.
ID (Log In/Out) Key
Press this key to log in/out when using the login
service.
Clear Key
Press this key to clear entered values or
characters.
3