1. Manuals
  2. Brands
  3. Swisson Manuals
  4. Recording Equipment
  5. XRC-200
  6. User manual

Swisson XRC-200 User Manual

Dmx recorder / replay unit dmx recorder / replay unit
Hide thumbs Also See for XRC-200:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
XRC-200
DMX Recorder
User Manual
Issue 1 (2011-03-06)
Copyright © 2011 SWISSON AG
No part of this documentation may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying and recording,
without the prior written permission of SWISSON AG.
The information in this documentation is supplied without warranty of any kind,
either directly or indirectly, and is subject to change without prior written notice.
SWISSON, its employees or appointed representatives will not be held
responsible for any damages to software, hardware, or data, arising as a direct or
indirect result of the product(s) mentioned herein.
Issued by
SWISSON AG
Fabrikstrasse 21
CH-3250 Lyss
Switzerland
E-Mail: welcome@swisson.com
XRC-200
DMX Recoder
SWISSON of AMERICA Corp.
2419 East Harbor Blvd. #34
Ventura, CA 93001
U.S.A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XRC-200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Swisson XRC-200

Summary of Contents for Swisson XRC-200

  • Page 1 The information in this documentation is supplied without warranty of any kind, either directly or indirectly, and is subject to change without prior written notice. SWISSON, its employees or appointed representatives will not be held responsible for any damages to software, hardware, or data, arising as a direct or indirect result of the product(s) mentioned herein.
  • Page 2 XRC-200 DMX Recorder / Replay Unit...

  • Page 3: Safety Information

    Do not operate the device if any cover or component is missing damaged or deformed. Refer any service operation not descriped is this manual to Swisson. Provide unrestricted airflow arround the device. Do not operate the device if the abient temperatue exceeds 55 C (131 F).

  • Page 4: Mains Connection

    Unpacking The XRC-200 is packaged in a cardboard box. The following items are included: - The device - This user manual Mains Connection Two different mains connections are available: The US versions are delivered by Swisson with a "Edison Plug" (NEMA-5-15).
  • Page 5 Overview...
  • Page 6 Selection buttons. These buttons are used to select a sequence, a playlist or to enter numeric values. Cancel button. This button is used to abort processes and to close dialogs. Ok button. This button is used to confirm. LCD screen. Step backward whithin plalist.

  • Page 7: Recording A Sequence

    Recording a sequence Make sure, that the XRC-200 is in NORMAL mode (see p. 11) , before trying to record. Hint: This is the case after resetting the XRC-200 to the FACTORY SETTINGS (see p. 14). Connect the XRC-200 between your light controller and your light equipment.

  • Page 8: Playing A Sequence

    Playing a sequence The light controller is not needed to play and can be disconnected. Enter the number of the sequence to play (from 1 to 64) and press the play button. Now the sequence is playing. It's possible to interrupt the sequence with the pause button. Press play to resume. Main Screen DMX in Status Aux Port...
  • Page 9 Menu The menu may be accessed by pressing the OK button, when the XRC-200 is stopped. The up and the down arrow keys are used to highlight menu items. The OK button is used to enter a highlighted submenu. Any setting changes but the time of the day and the day of the week are applied only when you return to the main screen.
  • Page 10 SEQUENCE 01 SEQUENCE 64 SET PARK SEQUENCE NONE SEQUENCE 01 SEQUENCE 64 DMX REMOTE CONTROL DMX FADE IN TIME SEQUENCES INFO EXTERNAL CONTACTS SYSTEM SETTINGS TIME DAY OF THE WEEK USER ACCESS LEVEL SET USER ACCESS LEVEL FULL ACCESS PLAYBACK ONLY KEYPAD LOCKED KEYPAD LOCKED STANDBY KEYPAD LOCKED STANDBY...
  • Page 11 NORMAL and FAST ACCESS. NORMAL mode When the XRC-200 is started in NORMAL mode, the user may select sequences or playlists by entering a sequence or a playlist number using the number keys. Selected sequences or playlists may be replayed using the play key.
  • Page 12 OK button. Note: The STARTUP TIMER will cause the XRC- 200 to start up only, if the XRC-200 has been in the STANDBY mode when the built in clock reaches the time configured and if the STARTUP TIMER has been configured.
  • Page 13 This dialog enables the configuration of the remote controllability via DMX of the XRC-200. The arrow buttons are used to select one of the 6 fields. When the dialog is opened, the field in the top left is selected. Press the OK button to enable or disable DMX REMOTE FAST ACCESS.
  • Page 14 OK button twice. EXTERNAL CONTACTS External contacts can only be used with the Swisson XRC-CT15b. The EXTERNAL CONTACTS are configured the same way as the FAST ACCESS CONFIG (see OPERATING MODES>FAST ACCESS CONFIG). However, for EXTERNAL CONTACTS, STOP and PAUSE are available as additional actions.

  • Page 15: Creating A Playlist

    Causes the playlist to be halted until the contact, which is specified by the second parameter is triggered UNTIL TIME Halts the playlist until the XRC-200's clock reaches the time of the day specified by the second parameter FOR PLAY PRESSED...
  • Page 16 External Contact 01 has been triggered, the playlist will be continued on line 3, which will cause the XRC-200 to replay the sequence 5 twice. Then it will repeatedly replay the sequence 7 until the Contact 2 is triggered.

  • Page 17: Technical Data

    Technical Data Mains Voltage 100 - 240 [VAC] Main Frequency 50/60 [Hz] Fuse Delay-action fuse, 2 A, 250V Current Consuption Single Units 0.2 [A] Operating Temperature 0F to 131F (-17 C to 55 C) ° ° Protocol Standard ANSI E1.11 (DMX-512) Safety Standards EN60950-1 EMC emmision...

Table of Contents