4-2. SCHEMATIC DIAGRAM
Refer to page 14 for IC Block Diagrams.
z
Note:
• U : B+ Line.
• All capacitors are in µF unless otherwise noted. pF: µµF
• Voltages are dc with respect to ground under
50 WV or less are not indicated except for electrolytics
no-signal conditions.
and tantalums.
no mark : FM
• All resistors are in Ω and
1
/
W or less unless otherwise
4
(
) : AM/LW
specified.
• Voltages are taken with a VOM (Input imped-
•
f
: internal component.
ance 10 MΩ).
Note: The components identified by mark 0 or dotted
Voltage variations may be noted due to normal
line with mark 0 are critical for safety.
production tolerances.
Replace only with part number specified.
– 11 –
• Signal path.
F
: FM
• Abbreviation
AUS : Australian
SP
:Singapore
AR
: Argentine
IT
:Italian
CET : East European & Russian
C&SA : Central & South America
– 12 –
ICF-C211/C211L
– 13 –