7) Remove the A-COVER ASSY.
9) Protect the LCD with protective film.
11) Release the clips holding the UI SHIELDING ASSY
with the SS-93. Then lift up the assy as shown in the
small picture.
13
8) Separate the KEYMAT ASSY from the A-COVER by
pressing the keymat lightly. When the keymat is
separated protect both sides of the window with
protective film to avoid scratches.
10)
Nokia 2730:
screws in the order shown. Do not use them again.
12) Remove the UI SHIELDING ASSY and the LIGHT
SWAP PWB.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia 2730 classic
RM-578 / RM-579
Service Manual Level 1&2
Unscrew the four TORX+ size 6
Version 1.0
ISSUE 1