About Digiality T-2000 Fta / T-2001 Cx - Digiality T-2000 FTA User Manual

1. About Digiality T-2000 FTA / T-2001 CX

Read this manual carefully before connecting the receiver.
Your new Digiality receiver is a very simple and user-friendly receiver that can receive terrestrial
digital channels. Furthermore, the T-2001 CX can receive scrambled channels in Conax.
One of our objectives in the development of the receiver has been to create a menu system that
is as easy to use as possible. We have done our best to make the software stabile, so that it
does not require frequent updates. There can of cause be cases in which we need to update the
software, e.g. if the operator changes the format in which they broadcast the channels. If we have
to update the software we will use a technique that allows us to update the software "over the air".
This allows us to update the software so that the user always has the best software available.
Giving better performance and user gratifi cation.
In case you experience problems with the receiver, please contact your dealer.
SAFETY!
Power Supply:
Overload:
Fluids:
Ventilation:
Connection:
The warranty does not cover:
4
190-250V AC 50/60 Hz
Please do not overload the wall plug or extension cord;
this can cause an electrical fi re.
Please do not expose the receiver to water or any other
kind of fl uids.
The ventilation holes on top of the receiver must never be
covered. Make sure that there are always a minimum of
10 cm "free space" around the receiver, i.e. to the rear,
on both sides and on top. Never place the receiver on
a carpet or any other kind of soft material. Never expose
the receiver to heat such as direct sunlight or heat from a
radiator.
Never place any other electrical Items on top of the
receiver. Never place the receiver on top of any other
electrical items. If the receiver is correctly ventilated it will
perform much more stable and have a longer lifetime.
Please do not connect any devices not mentioned in the
user manual to the receiver.
Damages from lightning, damages caused by water or
fl uids, connection of equipment not mentioned in this
manual, installation of unauthorized (i.e. patch or copied)
software and any other mistreatment of the receiver.
DIGIALITY T-2000 FTA / T-2001 CX